Interior Modification
 

Difficultly

Pure P10 Mod Key People this one is dead easy even the most novice person can do this job.
           
 
Change the color of the rear passenger light
 

This is a step by step on how to change the rear passenger light from standard white to blue (or any color you choose). You will need only a flat head screw driver for this mod.

Step 1

First you will need to buy the replacement bulb, this is you first step because you may not be able to find a replacement bulb that is the same size as your original bulb. The reason for this is that the Primera original bulbs are bigger than many mod bulbs, so buy a colored bulb that is just a little bit smaller than the original.

Step 2

Remove the cap that covers the light to expose the bulb, now carefully remove the original bulb.

Step 3

You will notice that the new bulb dose not fit into the holder, here is where you will have to do the mod. Just get a screwdriver and place it behind the back piece of the connector, now pull it towards the front connector.

Step 4

Now you will be able to fit the new bulb without any gaps.

Step 5

Replace the light cover and enjoy your new mod.

(Durning the day the light will not seem very brite, but the effect really comes out at night)

Back to top

 

Change the color of the rear passenger light